Lo Cut Cut-Off Frequency; Lo Cut In; Hi Cut Cut-Off Frequency; Hi Cut In/Out - SoundCraft Vi3000 User Manual

® ®
LO CUT Cut-Off
Frequency
Field / Group: LO CUT
Adjusts the LO CUT cut-
off frequency

LO CUT IN

Field / Group: LO CUT
Switch the digital LO
CUT filter in and out
HI CUT Cut-Off
Frequency
Field / Group: HI CUT
Adjusts the HI CUT filter
cut-off frequency.

HI CUT IN/OUT

Field / Group: HI CUT
Switch the digital HI
CUT filter in and out
Channel Pairing
Field / Group: PAIR-
Selection
ING
Activate channel pairing
selection on touch
screen.
Pairing Format
Field / Group: FOR-
Selection
MAT
Adjusts stereo format of
paired channels.
6.5.1
Vi3000 USER MANUAL Vi3000 USER MANUAL
This is part of the digital (post AD) LO CUT / HIGH CUT
section and affects all inputs. The affected frequency
range is shown graphically in the EQ section of the touch
screen.
When the digital LO CUT filter is switched in, the LO
CUT indicator above the response graph in the EQ touch
section is highlighted in blue.
This is part of the digital (post AD) LO CUT / HIGH CUT
section and affects all inputs. The affected frequency
range is shown graphically in the EQ section of the touch
screen.
When the digital HI CUT filter is switched in, the HI CUT
indicator above the response graph in the EQ section of
the touch screen is highlighted in blue.
The touch screen will show pairing candidate options for
the channel - these will be consecutive channel numbers
(horizontal neighbours) and the corresponding chan-
nels on higher and lower layers (vertical neighbours).
All channel parameters will be copied to the selected
pairing candidate and the pairing FORMAT field will be
displayed.
The choices are LR, RL, LL, RR, MONO. If the channel
is not paired, the FORMAT field will not be displayed.
6.5.1: INPUT CHANNEL > INPUT
20Hz
Out
1kHz
OUT
No Selection
LR
6.5.1: INPUT CHANNEL > INPUT
600Hz
In
20kHz
IN
Channel
Selection
MONO