Input Vistonics Buttons (Vst Section Control) - SoundCraft Vi3000 User Manual

® ®
These buttons control the functionality of the input channel VST encoders.
You can easiliy and rapidly assign bus contributions and bus panning to the encoders using this button group.
Pre/Post
Field / Group:
Configure Aux sends
from channels (when
they are assigned to the
two VST encoder rows),
as pre or post-fader.
VST Mode: Pan
Field / Group:
Activate aux paning
for encoders where
applicable.
Fast Assign
Field / Group:
Provides a very fast way
to temporarily assign a
bus function to a VST
encoder row.
6.4
Vi3000 USER MANUAL Vi3000 USER MANUAL

Input VISTONICS Buttons (VST Section Control)

If a stereo Aux is assigned to a VST encoder row, and
if the [PAN] key is active, the encoder will control the
Aux Pan rather than the contribution level. If both Auxes
assigned to Row 1 & 2 are Stereo Auxes, both Rows 1
and 2 will change to the PAN function across the desk. If
only one of the two rows is a Stereo Aux, then only this
row will change to PAN. If neither row has a Stereo Aux
assigned, the [PAN] switch will have no function.
Press and hold one of the [FAST ASSN] keys, then press
one of the Output Masters' [SOLO/SEL] keys.The rele-
vant row of VST encoders will now be assigned to that
Output master, and the [FAST ASSN] key in question
will illuminate. There will be no influence on audio, the
Output solo is not activated.
6.4: INPUT CHANNEL > VST CONTROL
6.4: INPUT CHANNEL > VST CONTROL
Active
Active
Activate
Mode
Active
Activate
Mode