Table of Contents
Advertisement
®
®
Isolate
Isolate the LRC Masters
from snapshot recall
or Show Recall (with
global filtering acive).
On
Bus On/Off (Mute).
LCR Select
Access the LCR Master
Busses processing
page.
LCR Fader
Control the output levels
of the LRC Masters
L/C/R Link
setup
Set up LRC Master bus
EQ and GEQ linking.
Access EQ
Adjust the parameteric
EQ for this Master.
4.3
7.1
Vi3000 USER MANUAL
Vi3000 USER MANUAL
See the Snapshots / Global Filtering reference for more
detail.
Gives access to the procesing blocks in the Master LRC
outputs via the touch screen area of the Master Bay
Vistonics.
The output levels of the LRC Master outputs are always
controlled by their dedicated faders. Those faders are
never used for anything else.
Left and Right busses can be linked, or the Centre bus
can be added to the linked L and R so that all three
busses can be adjusted together. It is not possible to link
Left and Centre or Right and Centre. The defualt state,
loaded with Default Show Files, is for LINK to be set to
ON for LCR busses, both EQ and GEQ.
The output bus parametrc EQ is the same is used for the
input channel EQ. Please see the input channel refer-
ence for more detail.
4.3: INPUT CHANNEL > DYNAMICS
7.1: OUTPUTS > LCR MASTERS
Inactive
Off (Muted)
7.1: OUTPUTS > LCR MASTERS
INPUT CHANNEL > De Esser
Active
Channel
isolated
Active
On
Active0
GEQ In
Advertisement
Table of Contents
