Menu: Shows - Show File Recorded Data; Menu: Shows - Recorded Data - SoundCraft Vi3000 User Manual

®
16.2.1 MENU > SHOWS > DATA
Vi3000 USER MANUAL

Menu: Shows - Show File Recorded Data

Menu: Shows - Recorded Data

Some settings are recorded as part of a Show, others as part of a Snapshot, and a few are not
recorded at all.
Please note that in addition to the snapshots in the cue list, a Show has one 'Show Snapshot'. This
Show Snapshot is generated automatically, and it cannot be seen by the user. It holds the Cue
List, the Show Settings and Audio Settings. These three sets of data contain all of the parameters
that change when a Show is loaded.
The Show Snapshot's Audio Settings contains all the settings which a standard Snapshot can
store; as a result, the Show Snapshot can be thought of as the last settings before the Show was
unloaded. The Show Snapshot allows the complete status of the console to be recorded with the
Show, even if no Snapshots have been saved.
Settings Recorded Within A Show Snapshot's Show Settings.
• Monitoring Settings: Monitor Level; Phones Volume; Solo Trims; Solo Blend; Monitor A/B Switch
Status; Monitor On/Off Switch Status; Monitor Source Selection Status; Monitor Setup states.
• All switches in Talkback section.
• Talkback Settings: Talkback Levels; Talkback setup.
• Generator Settings: OSC Level, Type.
• Mute Safe Status (Input & Output).
• System Preferences: Current Sample Rate; Sample Clock Settings.
• Automation Setup States.
• VCA / MG Assign View switches status: Currently selected view.
• Bus Config States: Bus Formats; Bus Types and Bus Labels.
• Channel Pairing States: Stereo Channel pairings.
• HiQnet Setup.
• MIDI Configuration Setup: MIDI Channel names.
• ISO switch status (Input & Output).
• O/P Vistonics Lock Mtr switch status.
• O/P Vistonics Solo/OnOff/TB switches.
• All parameters in the menu/settings page.
• Follow Solo switches.
16.2.1 16.2.1 MENU > SHOWS > DATA