Console Metering - SoundCraft Vi3000 User Manual

®
12.0: METERING
Vi3000 USER MANUAL

Console Metering

Level metering in the Vi 3000 goes from +18dB to -36 dB. It represents the actual output level in dBu from its analogue
line output. Gain reduction is displayed in the Range 0 - 20dB. The Vi 3000 uses full floating-point calculations in its
DSP, which means that the audio signal inside the mixer cannot be overloaded. If the signal level is too high at the
master output meters, it is necessary only to pull down the master fader level until the correct level is obtained.
There are meters on every channel and bus master, plus metering for every console path in the default Master Bay
touchscreen areas.
The touchscreen meters can be touched to assign the third (right-hand-end) input bay mapping.
12.0 12.0: METERING