Preview Mode; Recall Last Cue; Recall Next - SoundCraft Vi3000 User Manual

®

Preview Mode

Make the cue list avail-
able for preview via the
cue selection buttons
[LAST], [NEXT], [UP},
and [DOWN].

Recall Last Cue

Select AND recall the
previous cue in the cue
list.

Recall Next

Cue
Select AND recall the
next cue in the cue list.
Recall Selected
Cue
Recall a cue that has
been pre-selected with
the [UP] and [DOWN]
keys
Up / Down Cue
List
Pre-Select cues by
scrolling up and down
the cue list. Press [RE-
CALL] to load that cue.
Isolate From
Recall
Isolate ('protect') this
channel or selected
parameters from the ef-
fects of snapshot recall
or Show recall.
14.1
Vi3000 USER MANUAL
When Preview Mode is deactivated, the cue list will
return to the cue selected before Preview Mode was
activated.
The [ISO buttons are found on the console channel strips.
This function requires the GLOBAL FILTER parameter set to 'On' (default) in the Snapshot
settings screen. Isolate whole channels by pressing that channel's [ISO] button. Isolate
sections, processing blocks, and so on by holding an [ISO] key down and selecting those
blocks/sections. Any isolated channel or selection will not be affected by the RECALL of a
snapshot from the cue list.
If you have 'LOAD ISO WITH SHOW' (Snapshot Set-up) set to 'No' then your selections will
also be isolated from a Show load. See the Snapshots Filtering And Isolation section below
for more information. In addition to it's usefulness in performance, the ISO function can also
be useful for updating snapshots with new settings. For example, you could update a chan-
nel's EQ settings, isolate it, then recall cues and 'UPDATE CUE' with the new settings.
14.1: SNAPSHOTS, CUES > CONTROLS
14.1: SNAPSHOTS, CUES > CONTROLS
Inactive
Normal
Active
Activate Pre-
view Mode