®
17.1: FX > USING THE FX
Vi3000 USER MANUAL
As An Insert
To patch an FX unit into the insert point of an input channel, select the Panning/Insert block from the bottom of the
touch screen channel strip, then use the {INSERT} patch option to select an FX Unit. Touch the (FX) button on the top
left of the touch screen to show the available FX selections.
Once assigned you will be able to edit the selected FX unit directly by touching the FX block in the input channel's
touch screen channel strip.
17.1
17.1: FX > USING THE FX