Table of Contents
Advertisement
®
Frequency Con-
trol
Field / Group: FREQ
Adjust the centre
frequency (band pass)
or cut-off frequency
(shelving) of the EQ.
EQ Bandwidth /
Q Control
Field / Group: BwOct
Adjust the bandwidth
or Q (inverse) of the
current filter.
Field / Group:
Shelf Select
BwOct/Q
Choose a shelving
response for the filter.
Gain Control
Field / Group: GAIN
Adjust the gain applied
to the defined filter
band.
EQ Band In
Field / Group: GAIN
Switch the selected EQ
band into the Equaliser
signal path.
Flatten All
Field / Group:
Flatten settings for the
whole equaliser section.
Field / Group: EQUAL-
EQ In
ISER
Switch the whole equal-
iser section into and out
of the channel signal
path.
6.5.2
Vi3000 USER MANUAL
All changes are reflected in the graphic Vistonics touch
screen EQ section. Any band currently being adjusted
is shown highlighted in white. All four bands feature full-
range frequncy control.
You can chose whether the adjustment unit is Bandwidth
or Q via the main settings screen by hitting the [menu]
button.
The shelf response is available to the high (HF) and low
(LF) EQ bands.
Please note, there is also an EQUALISER IN button to
switch the equaliser section into the channel signal path.
Respects in/out settings on individual bands. When the
Equaliser section is 'In' the EQ graphic on the Vistonics
input channel touch screen area will be highlighted in
red.
6.5.2: INPUT CHANNEL > INPUT
Range Low
20Hz
Range Low
0.3Q/0.2oct
Inactive
Bell
Range Low
-18dB
Inactive
Out
Inactive
Out
6.5.2: INPUT CHANNEL > INPUT
Range High
20kHz
Range High
8.7Q/4oct
Active
Shelf
Range High
+18dB
Active
In
Active
Flatten
Active
In
Advertisement
Table of Contents
