Stereo Aux Send Balance; Group Buss Routing; Stereo Group Buss Routing; Buss 'Blank' - SoundCraft Vi3000 User Manual

®
Stereo Aux
Send Balance
Field / Group: Aux n
Adjust balance of the
numbered stereo aux
send.
Group Buss
Routing
Field / Group: Group n
Route the input channel
signal to the numbered
group bus.
Stereo Group
Buss Routing
Field / Group: Group n
Route the input channel
signal to the numbered
stereo group buss.

Buss 'Blank'

Field / Group:
Shows this buss has
been assigned as a
Matrix buss.
6.5.4
Vi3000 USER MANUAL
The Stereo symbol above the encoder shows that this
aux send has been combined with its numerical neigh-
bour to create a stereo aux send. The 'neighbour' aux
send space will either be blank or show a balance con-
trol, depending on the busses' 'channel pan' status. If
the aux has been set to follow the input channel panning,
there will be no balance control.
The corresponding group assign bar in the bus touch
screen area is extended and highlighted in blue when the
numbered groups bus routing is enabled for this channel.
The Stereo symbol above the encoder indicates that
this group has been paired with its neighbour to create
a stereo group buss that follows channel panning. The
neighbouring group display will be blank.
6.5.4: INPUT CHANNEL > VISTONICS>BUSSES
6.5.4: INPUT CHANNEL > BUSSES
Range Low
30L
Inactive
Off
Inactive
Off
Inactive
-
Range High
30R
Active
On
Active
On
Active
-