Vca Setup; Bulk Assign Vca; Aux Vca Mode Bulk On/Off; Reset Vca Masters - SoundCraft Vi3000 User Manual

® ®

VCA Setup

Press the MUTE & VCA
GROUPS [SETUP] but-
ton, then chose a VCA
[SOLO/SEL] to config-
ure that VCA group.
Bulk Assign
VCA
Select all input channels
or no channels as mem-
bers of the VCA Group.
Aux VCA Mode
Bulk On/Off
Turn all VCA Mode
masters in the master
bay on or off. (see Aux
VCA Mode reference)
Reset VCA
Masters
Set VCA Masters to
0dB.
Label VCA
Group
Opens up a standard
labelling keyboard in
the Master Bay touch
screen area for labelling
the VCA master.
Aux VCA Mode
[On]/Off
See the curently se-
lected Aux VCA Master
on or off (see Aux VCA
Mode reference).
4.3 9.2
Vi3000 USER MANUAL Vi3000 USER MANUAL
The [SETUP] button will glow blue when pressed. The
[SOLO/SEL] button of the chosen VCA Master will also
glow blue. You can then press the [SOLO/SEL] buttons
on any channels you wish to make part of that VCA
group. Then either press the [SETUP] button again to
exit the configuration mode, or press another VCA Mas-
ter [SOLO/SEL] button to configure a new VCA group.
During configuration of VCA groups, a number of options
become available in the Master Bay touch screen and
VST area (see below).
Either set the currently selected master to 0dB, or all aux
send VCA masters (see Aux VCA Mode reference).
When in fader [FLW] mode and an Aux master is
selected, VCA Masters set to 'ON' will control the Aux
VCA group, not the 'normal VCA group. Aux VCA group
master faders are highlighted with white FaderGlow,
while 'normal' channel VCAs are highlighted with blue
FaderGlow.
9.2: MUTE & VCA GRPS > VCA GROUPS
9.2 MUTE & VCA GRPS > VCA GROUPS 4.3: INPUT CHANNEL > DYNAMICS
Inactive
Normal
Hide Label-
ling Keyboard
Normal
INPUT CHANNEL > De Esser
Active
Setup Mode
Show Label-
ling Keyboard
Aux VCA
Mode Active