Table of Contents
Advertisement
Forms Thickness Control Lever
The Forms Thickness Control lever adjusts the position
of the print head to allow room for single sheets or
multiple-copy forms. Move the lever toward the rear
for single sheets, and toward the front for
multiple-copy forms.
~
This lever can affect print darkness.
If
the printing is
too light, move the lever toward the rear of your
printer; if the printing is smeared, move the lever
toward the front. The best position for the lever is as
far to the front of your printer as possible while still
getting good print with a good condition ribbon
installed.
Warning: Positioning the Forms Thickness Control
lever too far to the rear for the paper being used will
result in premature wear of the print head.
Forms Thickness Lever
This Way for
Single Forms
1-16 Graphics Printer
Advertisement
Table of Contents
