IBM Personal Computer AT Manual To Operations page 104

ESC 9
Escape 9 (Cancel Ignore Paper End)
Cancels the Ignore Paper End command.
ESC 9 is selected when the printer's power
is turned on or reset.
LPRINT CHR$(27);CHR$(57);
FF
Form Feed
Advances the paper to the top of the next
page.
Note: The location of the paper when
the printer's power is turned on
determines the top of the page. The
next top of page is 279.4 mm (11 in.)
from that position. ESC C can be used
to change the paper length.
LPRINT CHR$(12);
HT Horizontal Tab
Tabs to the next horizontal tab stop. Tab
stops are set with ESC D. Tab stops are set
every 8 columns when the printer's power is
turned on.
LPRINT CHR$(9);
LF Line Feed
Spaces the paper up one line. Line spacing
is 4.23 mm
0/6
in.) unless reset by ESC A,
ESC 0, ESC 1, ESC 2, or ESC 3.
LPRINT CHR$(10);
1-44 Graphics Printer