Table of Contents
Advertisement
Did the self-test finish without failures?
YES
Go to Step 13.
NO
Go to Step 7.
7
Be sure that the ribbon is installed properly.
8
Be sure that the forms or paper are inserted
properly.
9
Be sure that the forms or paper path has no
obstructions.
lOBe sure that the tractors are adjusted properly.
If you need help with any of the above, refer to
Section 1 for printer operating instructions.
11
Did you find any problem while doing the above
steps?
NO
Go to Step 12.
YES
Correct the problem and restart the
printer self-test.
Note: If you are using a non-U.S. English
keyboard and your printout does not match
the desired character set, have your printer
serviced.
8000-4 Test
Advertisement
Table of Contents
