Error Examples
An "Error Example" has three blocks. Each block has
a response and they are:
•
A screen response.
• An audio response.
• An action to resolve your problem.
The screen and audio response of an Error Example
must match the responses of your system. When you
find the response that matches your system's, follow
the action in the action block.
Note:
If
you missed a response or are not sure of
your system's responses turn your system unit's
power off then on again.
Warning:
If
you have to move your system unit for
service and it has a fixed disk drive, it is recommended
that all files be backed up onto diskettes. Normal
shipping and handling can result in permanent loss of
data on your fixed disk drives.
See the IBM Disk Operating System (DOS) manual for
a description of the BACKUP command.
Go to the "Error Examples" on the following pages and
find the error example that matches your system's
responses.
Error
Examples
2-15
Need help?
Do you have a question about the Personal Computer AT and is the answer not in the manual?