AXIOMTEK IMB207 Series User Manual page 72

IMB207 LGA1155 ATX Motherboard
Delete RAID volume
If you want to delete a RAID volume, select the Delete RAID Volume option in Main Menu.
Press <Enter> and follow on-screen instructions.
Please press <Esc> to exit the RAID BIOS utility. Now, you can proceed to install a SATA driver
controller and the operating system.
4. Making a SATA driver disk.
To install the operating system onto a serial ATA hard disk successfully, you need to install the
SATA controller driver during the OS installation. Without the driver, the hard disk may not be
recognized during the Windows setup process. First of all, please format a blank floppy disk.
Secondly, follow up these steps below to produce a SATA driver disk.
Users can insert the driver DVD and the formatted blank floppy disk in another system. And
then, please copy all of file of the "f6flpy-x32" folder in the driver DVD to a floppy disk.
Note: Please copy all of file of the "f6flpy-x64" folder, if installing 64-bit Windows
Operating System.
5. Installing the SATA controller driver during the OS installation
Now, the SATA driver disk is ready, and BIOS settings configured, you can proceed to install
Windows 2000/XP onto your SATA hard drive using the SATA driver. Here is an example for
Windows XP installation.
65
Configuring SATA for RAID