KeyWest Technology MXB-AV Manual page 107

MediaXtreme MediaZone
[Security]
Password=
[Ambient Audio]
Enabled=False
INI Parameter Definitions:
Display - controls various aspects about the screen
[Display]
Width - Screen resolution width, in pixels.
Width=1024
Height - Screen resolution height, in pixels
Height=768
Refresh - Refresh rate of the monitor. The application will attempt to run at this many frames
per second as well, which affects the speed of crawls/rolls, since their speed is defined in terms
of pixels per frame. The more frames you have per second, the more pixels a crawl or roll will
move per second, and thus the faster it moves.
Refresh=60
Note on Width, Height and Refresh - The values specified must be supported by the
hardware--if they are not the program will default to 800 by 600 at 60 Hz.
Rotation - Sets the rotation of the screen to some multiple of 90 degrees. Can be 0 (which is
normal), 90, 180, or 270. Use this to orient a display sideways, or even upside down.
Rotation=0
Monitors - Specifies the number of monitors that are to be used. Standard hardware supports
only one monitor—customized hardware may support up to four.
Monitors=1
Dynamic Textures - Specifies whether or not the MX will use dynamic textures. Use of these
textures aids in preventing jerks when new content is uploaded into the video memory. Some
cards do not support these textures. Only Matrox quad head cards fall under this category, thus -
MH4 must have this setting at False—all others would be true.
Dynamic Textures=True
Options - controls miscellaneous options
[Options]
Keywest Technology
107
th
14563 W. 96 Terrace
Lenexa, Kansas 66215
23 Mar 2009
800.331.2019
Change 06
www.keywesttechnology.com