KeyWest Technology MediaPOD-E Quick Start Manual

Shipment Packing List:

1. MediaPOD-E Player

2. 19V AC/DC External Power supply

3. Wi-Fi Antenna (Optional)

(4) VESA Mounting Screws (Optional)

5. MediaPOD-E Editor Install & Manual CD

If you have any questions about any of the steps below, you can contact our technical support

United States Tech Support: Call

Asia/Pacific Tech Support: Call

Other International Regions: Call

Email E-mail Support: tech@keywesttechnology.com

MediaPOD-E QUICK START GUIDE

TECHNICAL SUPPORT

department.

800-331-2019

+65-3106-2499

+1-913-492-4666

800-331-2019 press option 2

+65-3106-2499

+1-913-492-4666 press option 2

Table of Contents

Do you have a question about the MediaPOD-E and is the answer not in the manual?

Page 1 2. 19V AC/DC External Power supply 3. Wi-Fi Antenna (Optional) (4) VESA Mounting Screws (Optional) 5. MediaPOD-E Editor Install & Manual CD TECHNICAL SUPPORT If you have any questions about any of the steps below, you can contact our technical support department.
Page 2 19V AC/DC External Power Supply Connect the VGA cable from the LCD Monitor to the VGA connector on the back of the MediaPOD-E Connect the power supply into the power supply connector on the back of the rear panel after you...
Page 3 You will need a monitor, mouse and keyboard connected to the system in order to change any content. If you have the unit setup on your network, then you can use the MediaPOD-E Editor software to upload new content. If you do not have the unit connected to the network, then you can change the content on the unit itself by using the MediaPOD-E Editor software that is on the MediaPOD-E Player hardware.
Page 4 ‘Saved’ the new playlist, then you need to press the blue ‘Play’ button arrow in the menu bar at the top of the software. Disconnect the mouse and keyboard to finish updating your MediaPOD-E. TECHNICAL SUPPORT If you have any questions about any of the steps above, you can contact our technical support department.