Buffalo TeraStation TS5800D User Manual page 70

14
The created volume is connected using software from Windows. The connection method varies depending on your
software.
Note:
Data can be lost if the TeraStation is shut down while still connected. Always disconnect the volume before
shutting down the TeraStation.
Procedure using Buffalo's iSCSI Hard Disk Connection Tool
(1) Install the iSCSI Hard Disk Connection Tool on the computer using the CD supplied with the TeraStation. You can also
download the iSCSI Hard Disk Connection Tool from www.buff alotech.com.
(2) Click [Start] - [All Programs] - [BUFFALO] - [iSCSI Hard Disk Connection Tool] - [iSCSI Hard Disk Connection Tool]. The
iSCSI Hard Disk Connection Tool will launch.
(3) Click [Register the iSCSI Hard Disk.], select the volume to connect, and click [Connect] .
Note:
If you will use the TeraStation regularly, check "Connect on Start Up". Then click [Connect].
For the iSCSI Initiator included with Windows 7, Windows Vista, and Windows Server 2008
(1) Click [Control Panel] - [Administrative Tools] - [iSCSI Initiator].
(2) Enter the IP address of the TeraStation in [Target], then click [Quick Connect].
69