Buffalo TeraStation TS5800D User Manual page 12

6
Right-click on your TeraStation's icon, then click [Properties].
Note:
For Mac OS X, click the TeraStation icon while holding down the control key, then click [Confi gure].
7
Click the [IP Settings] tab, enter the desired settings, and click [OK].
Notes:
• If you don't know how to configure these settings, check [Obtain IP address automatically via DHCP]. For Mac
OS X, check [Use DHCP].
• If you are prompted to enter the administrator's password, enter the TeraStation's password (it is set to
"password" by factory default).
11