Buffalo TeraStation TS5800D User Manual page 61

TeraStation.
• If the primary group was changed, the changes are not applied to quotas until the TeraStation is restarted.
4
Click [Close].
5
Click next to [Groups].
6
Click [Add Group].
7
Enter the desired settings.
Notes:
• Group IDs may be between 1000 and 1999. Do not duplicate group IDs.
• Group names may contain up to 20 alphanumeric characters, hyphens (-), underscores (_), and periods (.). Do
not use a symbol other than an underscore (_) as the first character.
• Group descriptions may contain up to 75 alphanumeric characters, hyphens (-), underscores (_), and spaces. Do
not use a symbol and space as the first character.
• You may register up to 300 groups with the TeraStation.
• Deleting or adding groups repeatedly may cause quotas to not work properly. Even with data copied by backup,
disk quotas my not work properly if there are duplicate user IDs or group IDs. If this happens, fix the problem
using one of the methods below.
- Change all usernames and group names to unique values.
- Copy the files from the TeraStation to a different drive, delete the original files, then copy the files back to the
TeraStation.
8
Click a user you added under [Username].
60