Buffalo TeraStation TS5800D User Manual page 202

adjusts its clock automatically by using an NTP server.
Notes:
• The internal clocks of the TeraStation and other devices on your network may run at slightly different speeds.
Over a long period of time your network devices may show somewhat different times, which can cause network
problems. If clocks on your network vary by more than 5 minutes it may cause unexpected behavior. For best
results, keep all clocks on the network set to the same time by adjusting them regularly, or use an NTP server to
correct them all automatically.
• The default NTP Server (ntp.jst.mfeed.ad.jp) belongs to Internet Multi Feed Inc. For more information, please
visit www.jst.mfeed.ad.jp. Use NTP at your own risk. Buffalo Technology is not responsible for any loss or
damage caused by using of this service, stopping the service, or missing service.
• If NTP will not be used, disable it and enter the time and date manually. Click [Use Local Date/Time] to import
the time and date from your computer.
• In certain cases, the DNS server address must be set in order to access the NTP server.
6
Click the [Language] tab.
Select the language to be used in the Windows client, then click [OK].
This completes the setup.
201