Buffalo TeraStation TS5800D User Manual page 14

must be set in [Network] - [IP Address] of the Web Admin interface.
11
To confi gure a RAID scan, click [Drives], then change the icon next to [RAID Scanning] from
Note:
RAID scans check RAID arrays to confi rm that they can be read properly and have no bad sectors. If any problems
are found, they will be repaired automatically.
12
This creates a USB memory device that can be used to restore default settings or transfer settings to another iden-
tical TeraStation.
1. In the TeraStation's Web Admin interface, click [Management] -
2. Connect a USB memory device (not included) with 1 GB or larger to a USB 2.0 port on the TeraStation.
3. Select [Create a special USB drive for password recovery]. This recovery USB drive will also reset the TeraStation's
administrator password to its default.
4. Select the connected USB memory device, then click [Execute].
To return the TeraStation to the default settings using the created USB memory device, see "Recovering by
Changing the Boot Mode Switch on the Rear Panel When Starting the TeraStation" in Chapter 9.
13
In NAS Navigator2, double-click your TeraStation's icon. This will open the shared folder of the TeraStation.
Notes:
• For Mac OS X, the TeraStation is mounted as a drive icon on the desktop, or it is displayed in the sidebar of the
next to [Restore/Erase].
13
-> .