Buffalo TeraStation TS5800D User Manual page 190

9
Click [Add Client].
10
Enter the hostname and IP address of the NFS client (such as the UNIX-based OS), then click [OK].
Note:
The procedure for checking the IP address and hostname varies depending on the OS. Refer to the Help in your OS
or other information.
11
Click [Close].
Notes:
• To cancel the registration, click the check box of the displayed hostname so that a check mark appears, and then
click [Delete Client].
• An NFS connection may be possible from computers that are not registered to the connection client.
12
Execute commands for accessing the shared folder in the TeraStation from the NFS client (such as UNIX-based OS).
Some examples of commands are shown below.
Linux:
mount -t nfs <IP address>:<NFS public path of TeraStation> <mount point on local computer>
Example) mkdir /mnt/tsxl
mount -t nfs 192.168.11.10:/mnt/array1/share /mnt/tsxl
In this example, the IP address of the TeraStation is 192.168.11.10, the NFS public path is /mnt/array1/share, and the
mount point on the local computer is tsxl.
189