Collating Copies; Placing Separator Sheets Between Copies - Lexmark 7527-415 CX410e User Manual

Copying
•
Newspaper—The original document is from a newspaper.
• Other—The original document was printed using an alternate or unknown printer.
7
Touch > Copy It.

Collating copies

If you print multiple copies of a document, then you can choose to print the copies as a set (collated) or to print the
copies as groups of pages (not collated).
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
From the home screen, navigate to:
Copy > enter the number of copies > Collate > select the preferred order of pages >

Placing separator sheets between copies

1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
From the home screen, navigate to:
Copy > Separator Sheets
Note: Set Collate to "1,2,3 ‑ 1,2,3" to place separator sheets between copies. If Collate is set to "1,1,1 ‑ 2,2,2,"
then the separator sheets are added to the end of the copy job. For more information, see
page 74.
4
Select one of the following:
•
Between Copies
•
Between Jobs
Collated Not collated
> Copy It
"Collating copies" on
74