Lexmark 7527-415 CX410e User Manual page 198

Securing the printer
3
From the Disk encryption menu, select Enable.
Notes:
•
Enabling disk encryption will erase the contents of the printer hard disk.
• Disk encryption can take from several minutes to more than an hour, during which the printer will be
unavailable for other user tasks.
4
Click Submit.
Using the printer control panel
1
Turn off the printer.
2
Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar
appears.
The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully
turned on, a list of functions appears on the printer display.
3
Touch Disk Encryption > Enable.
Note: Enabling disk encryption will erase the contents of the printer hard disk.
4
Touch Yes to proceed with disk wiping.
Notes:
•
Do not turn off the printer during the encryption process. Doing so may result in loss of data.
•
Disk encryption can take from several minutes to more than an hour, during which the printer will be
unavailable for other user tasks.
•
A status bar will indicate the progress of the disk wiping task. After the disk has been encrypted, the printer
will return to the Enable/Disable screen.
5
Touch Back > Exit Config Menu.
The printer will perform a power‑on reset, and then return to normal operating mode.
198