Lexmark 7527-415 CX410e User Manual page 146

Understanding the printer menus
Use
Timeouts
Prolong Screen Timeout
On
Off
Timeouts
Print Timeout
Disabled
1–255
Timeouts
Wait Timeout
Disabled
15–65535
Timeouts
Job Hold Timeout
5–255
Error Recovery
Auto Reboot
Reboot when idle
Reboot always
Reboot never
Error Recovery
Max Auto Reboots
1–20
Print Recovery
Auto Continue
Disabled
5–255
To
Set the printer to continue a specified job without returning to the
home screen when the screen timeout timer expires.
Note: Off is the factory default setting.
Set the amount of time in seconds the printer waits to receive an
end‑of‑job message before canceling the rest of the print job.
Notes:
•
90 is the factory default setting.
•
When the timer expires, any partially printed page still in the
printer is printed, and then the printer checks to see if any
new print jobs are waiting.
•
Print Timeout is available only when using PCL emulation.
This has no effect on PostScript emulation jobs.
Set the amount of time in seconds the printer waits for additional
data before canceling a print job.
Notes:
• 40 is the factory default setting.
•
Wait Timeout is available only when the printer is using
PostScript emulation. This has no effect on PCL emulation
print jobs.
Set the amount of time in seconds the printer waits for user
intervention before it holds jobs that require unavailable resources
and continues to print other jobs in the print queue.
Notes:
•
30 is the factory default setting.
•
This menu item appears only when a printer hard disk is
installed.
Set the printer to restart when an error occurs.
Note: Reboot always is the factory default setting.
Determine the number of automatic reboots the printer can
perform.
Note: 2 is the factory default setting.
Let the printer automatically continue printing from certain offline
situations when these are not resolved within the specified time
period.
Note: Disabled is the factory default setting.
146