Network/Ports - Lexmark 7527-415 CX410e User Manual

Understanding the printer menus

Network/Ports

Active NIC menu
Use
Active NIC
Auto
[list of available network cards]
Standard Network or Network [x] menu
Note: Only active ports appear in this menu.
Use
Energy Efficient Ethernet
Enable
Disable
PCL SmartSwitch
On
Off
PS SmartSwitch
On
Off
NPA Mode
Off
Auto
To
Allow the printer to connect to a network.
Notes:
• Auto is the factory default setting.
•
This menu item appears only if an optional network adapter is installed.
To
Reduce power consumption when the printer receives no data from the Ethernet
network.
Note: Enable is the factory default setting.
Set the printer to automatically switch to PCL emulation when a print job requires
it, regardless of the default printer language.
Notes:
•
On is the factory default setting.
•
If PCL SmartSwitch is disabled, then the printer does not examine incoming
data and it uses the default printer language specified in the Setup menu.
Set the printer to automatically switch to PS emulation when a print job requires it,
regardless of the default printer language.
Notes:
•
On is the factory default setting.
•
If PS SmartSwitch is disabled, then the printer does not examine incoming
data and it uses the default printer language specified in the Setup menu.
Set the printer to perform the special processing required for bidirectional
communication following the conventions defined by the NPA protocol.
Notes:
•
Auto is the factory default setting.
•
The printer automatically restarts when the setting is changed from the
control panel.
129