Additional Printer Setup; Installing Internal Options - Lexmark 7527-415 CX410e User Manual

Additional printer setup

Additional printer setup

Installing internal options

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or
memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord
from the electircal outlet before continuing. If you have any other devices attached to the printer, then turn
them off as well, and unplug any cables going into the printer.
Warning—Potential Damage: Controller board electronic components are easily damaged by static electricity.
Touch something metal on the printer before touching any controller board electronic components or connectors.
Available internal options
Note: Some options may not be available. For more information, contact the place where you purchased the printer.
• Memory card
–
DDR3 DIMM
•
Flash memory
–
Fonts
– Firmware
• Forms and Barcode
•
Prescribe
•
IPDS
Note: The printer hard disk is an optional memory device that can be attached to the rear USB port of the printer.
24