S70 SERIES USERS MANUAL
the UPS. To turn the UPS unit off, press the Power switch on the
front of the unit again.
Cold Start Function
When the UPS is off and there is not input utility power available,
it is still possible to cold start the UPS unit to power loads. Follow
the instructions for Turning UPS ON and be aware that you will
see and hear the ON BATTERY ALARM.
IMPORTANT SAFETY INSTRUCTIONS:
CAUTION! (UPS having Internal Batteries): Risk of electrical shock –
Hazardous live parts inside this unit are energized from the battery
supply even when the input AC power is disconnected.
CAUTION! (No User serviceable Parts): Risk of electrical shock, do not
remove cover. No user serviceable parts inside. Refer servicing to
qualified service personnel.
CAUTION! (Non‐isolated Battery supply): Risk of electric shock, battery
circuit is not isolated from AC input, hazardous voltage may exist
between battery terminals and ground. Test before touching.
WARNING! Unit intended for installation in a controlled environment.
CAUTION! Do not dispose of batteries in a fire, the battery may explode.
CAUTION! Do not open or mutilate the battery, released electrolyte is
harmful to the skin and eyes.
CAUTION! A battery can present a risk of electric shock and high short
circuit current. The following precaution should be observed when
working on batteries:
Remove watches, rings or other metal objects.
Use tools with insulated handles.
To reduce the risk of electric shock, disconnect the UPS from the main
supply before installing a computer interface signal cable. Reconnect
the power cord only after signaling interconnections have been made.
Xtreme Power Conversion® (XPC) Corporation 8
V2
(SAVE THESE INSTRUCTIONS)
Need help?
Do you have a question about the S70 Line?Interactive and is the answer not in the manual?