Network Scanner; Image Resolution - Konica Minolta T.37 User Manual

Network Scanner

Your fax machine can be used as a network scanner.
Remember the following when using your fax machine as a
network scanner:
•
you can adjust the resolution of the scanned images
•
turn off the IFAX Sender ID (User Function 90), or it
will appear on your scanned images
Example
Here is an example of using your fax machine as a network
scanner.
You have a hard copy document that you would like to
have on file as a digital copy.
You can use your fax machine to scan the document and
send the scan version (digital copy) to your e-mail address.
The scan version of the document is a TIFF file.
How it Works
The document is scanned as if it were being sent as an
Internet Fax, but the document is actually sent to an e-mail
address on the network.
The recipient (destination e-mail address) receives the
document on their PC as a TIFF file.
|
44 Konica FAX 9930

Image Resolution

The setting for User Function 89: Ex.Fine Mode adjusts
the resolution of the scanned image.
The resolution may be set between 300 and 600 dpi.
IFAX Sender ID
User Function 90: IFAX Sender ID must be set to ON when
you are using your fax machine for faxing using the Internet.
This places the IFAX Sender ID on the top of any documents
you send.
However, when you are using your fax machine as a network
scanner, you do not want this information to appear on your
scanned documents.
!
Set User Function 90: IFAX SENDER ID to OFF while
using your fax machine as a network scanner.
The IFAX Sender ID will not appear at the top of
scanned documents.
Be sure to set IFAX Sender ID to ON when sending
faxes.