Konica Minolta T.37 User Manual page 53

Numbers 900 and above are codes defined specifically for
this Internet Fax.
Codes
E001 Text print
When E001 occurs, the "Number of Pages"
column in the Activity Report will be blank.
E002 Text received but not printed
When E002 occurs, the "Number of Pages"
column in the Activity Report will be blank.
E900 Network Card I/F error
E910 TCP/IP or SMTP/POP not supported or allowed by
Network Card
E920 Network Card not ready; transmission request
received while Network Card is initializing
E930 No match for domain received; invalid user name
E931 E-mail cannot be received (invalid TIFF)
E932 E-mail cannot be received (other than invalid
TIFF)
E940 Memory full
E942 Command time-out
E950 Server communication error
E980 Aborted
SMTP Protocol Error Codes
The following are SMTP protocol error codes given in
RFC821.
RFC is an Internet "standards" term meaning "Request For
Comment." RFCs are documents that define standards or
proposed standard-definitions for network and Internet
operation. Individual RFCs define specific aspects of
network or Internet operation.
When these occur, contact your network administrator.
E421 <domain> Service not available, closing
transmission channel.
This may be a reply to any command if the service
knows it must shut down.
E450 Requested mail action not taken: mailbox
unavailable.
Example: the mailbox is busy.
E451 Requested action aborted:
local error in processing
E452 Requested action not taken:
insufficient system storage
E500 Syntax error, command unrecognized.
This may include errors such as command line too
long.
T.37Internet FAX User's Guide
|
51