Konica Minolta T.37 User Manual page 33

How to Send a Document
1 Load your documents.
2 Select the entry method.
For more information on entry methods, refer to the User's Guide,
"Basic Faxing, Sending a Fax."
Entry methods are:
•
One-Touch
•
Search
You must know the first letter of the e-mail address to
search for an e-mail address.
•
Non-programmed e-mail
also known as a Numeric Keypad or walk-up
You must send the document as an Internet Transmission.
See the following section ("Sending to a Non-Programmed
E-mail") for more information.
3 Press Start.
4 The machine scans the document and stores the document's image
data into memory.
5 Next, the machine establishes a server connection.
"Sending" appears on the display when the server connection is
established.
6 At the end of the transmission, the result shows on the display and
a buzzer sounds.
Sending to a Non-Programmed E-mail
Also known as Numeric Keypad (Walk-up) e-mail faxing
If you want to send an Internet Fax, but you do not want to program
the e-mail address as a One-Touch, you must make sure that it is sent
as an Internet Transmission.
1 Load the document.
2 Press the e-mail key.
3 Input the e-mail address.
!
One-Touch Key 32 is the @ symbol.
Use One-Touch Key 31 (Caps) to switch between
upper and lowercase letters.
4 Press Start.
T.37Internet FAX User's Guide
|
31