Fax Usage; Scan Usage; Network Menu; Print Debug - Lexmark 7003-050 X340n Service Manual

Fax Usage

Fax Usage is the second item displayed in the Count Reset menu. When Fax Usage is displayed, press the
key to select the Fax Usage sub menu item. The following sequence is used for all Fax Usage sub menu
settings.
1.
Use Up or Down to toggle between the ADF, Flatbed, and Received counter items.
2.
When the desired count is displayed, press
3.
Enter 0 to reset the count.
4.
Press . The new count is saved, and the display returns to the selected Fax Usage sub menu item.
5.
Press the Down to advance to the next page count item, or press
menu item.

Scan Usage

Scan Usage is the final item displayed in the Count Reset menu. When Scan Usage is displayed, press the
key to select the Scan Usage sub menu item. The following sequence is used for all Scan Usage sub menu
settings.
1.
Use Up or Down to toggle between the Total ADF and Total Flatbed items.
2.
When the desired count is displayed, press
3.
Enter 0 to reset the count.
4.
Press . The new count is saved, and the display returns to the selected Scan Usage sub menu item.
5.
Press the Down key to advance to the next page count item, or press
Reset menu item.

Network menu

Print Debug

The Print Debug menu item prints a debug report.
To print the debug report do the following:
1.
Use Up or Down to scroll to Network Menu.
2.
Press to select Print Debug.
The print debug report prints.
The display returns to Network Menu in the diagnostics menu.

Force Speed

The force speed menu setting can be used to change the communication connection setting for the network
card. To change the connection setting, perform the following tasks:
1.
In the Network Menu, use the arrow keys to scroll to Force Speed.
2.
Press to select Force Speed.
Connecting... is displayed.
3.
If the attempt to retrieve the connection value setting is unsuccessful, Connection failed is displayed,
and the MFP returns to Ready mode.
If the attempt is successful, the current connection value is displayed.
4.
Use Up or Down to scroll though the list of available connection settings. They are Auto, 10 full, 10 half,
100 full, and 100 half.
5.
When the desired setting is displayed, press
6.
The MFP displays Connecting....
If the setting is successfully changed, the display returns to Ready mode.
. The count for the selected item is displayed.
. The count for the selected item is displayed.
manuals4u.com manuals4u.com
7003-XXX
twice to return to the Count Reset
twice to return to the Count
Diagnostic aids
3-5