Lexmark 7003-050 X340n Service Manual page 26

Button Function
Display panel 2 X 16 character backlit LCD(DBCS capable).
Navigation Use the navigation buttons to navigate the MFP administrative menus.
keys
Press
Press
Press
menu item.
Back Press
Menu Press Menu to take the MFP out of the ready state. When Menu is pressed, the
administrative menu is displayed.
Alphanumeric The alphanumeric keys are used to enter numbers and special characters (e.g. "+" or ",")
keys and/or letters.
Multi-purpose Press the Content button to select the type of content being faxed or copied. Photos,
job setup Mixed, and Text are the available selections.
buttons
Press the Darkness button to set the lightness, or darkness of a copy or fax.
Start Press Start to:
• Initiate a copy, fax, or scan job.
• Clear some operator panel messages.
• Resume printing after loading media and clearing paper jams.
• Exit Power Saver.
If you have changed MFP settings from the operator panel menus, press Start before
sending a job to print. The MFP must display Ready for jobs to print. If any additional
information needs to be specified to start a function, a request for information will be
displayed on the panel.
Press Stop at the Ready, Busy, or Waiting message to temporarily take the MFP
Stop
offline. The message changes to Not Ready. No data is lost.
All settings associated with the currently active mode or job are set to default.
to navigate up the current active menu.
to navigate down the current active menu.
to select the currently displayed menu, or activate the currently displayed
to return to the previous menu level or to the ready state.
manuals4u.com manuals4u.com
7003-XXX
2-5
Diagnostic information