Table of Contents
Advertisement
6.2.3
Touch Screen Connector, JP2, Pins and Signal Descriptions
The Touch Screen connector, JP2, is a single row by 2.54mm 5-pins 90 degree, Male
type connector. The pins are numbered as shown in the table below.
JP2 Pin #
Signal Name
1
H / UR
2
Y / UL
3
COM
4
X / LR
5
L / LL
6.3
Physical Dimension
IDK-1119R User Manual
Figure 6.1 Board mounted header
Signal Description
Drive signal attached to the touchscreen substrate upper
right corner when viewed from a user's perspective.
Drive signal attached to the substrate upper left corner.
-
Drive signal attached to the substrate lower right corner.
Drive signal attached to the substrate lower left corner.
28
Advertisement
Table of Contents
