Touch Characteristics; Optical Characteristics; Environment Characteristics; Mechanical Characteristics - Advantech IDK-1119R-35SXA1E User Manual

5.1

Touch Characteristics

This touch panel uses a 5-wire Analog resistance type that customers use with flat
displays like LCDs. Once a user touches it with a stylus or finger, the circuit sends
coordinate points from voltages to the CPU at the contact point.
5.2

Optical Characteristics

Item
1 TRANSPARENCY
2 HAZE
5.3

Environment Characteristics

Item
Operation temperature
Storage temperature
Operation Humidity
Storage temperature
5.4

Mechanical Characteristics

Item
1 Hardness of surface
2 FPC peeling strength
3 Operation force
5.5

Electronic Characteristics

Item
1 Rated Voltage
2 Loop Resistance
3 Linearity
4 Chattering
5 Insulation Resistance
IDK-1119R User Manual
Specification
80% ± 3%
8.0% ± 3%
Specification
-20°C ~ 70°C
-40°C ~ 80°C
20% ~ 80%RH
20% ~ 90%RH
Specification
Pencil hardness 3H.
1) 5N (5N Min.)
2) 19.6N (19.6N Min.)
Pen 0.05N~1.96N
(5~200gf)
Finger
Specification
DC 7V max.
Ω
X axis: 200 ~ 500 (Figure as
bellow)
Ω
Y axis: 200 ~ 800 (Figure as
bellow)
≤
X 1.5% (Figure as bellow)
≤
Y 1.5% (Figure as bellow)
15ms
≥ Ω
20M min (DC 25V)
22
Remarks
BYK-Gardner
BYK-Gardner
Remarks
Note: All terms under 1 atmo-
sphere
Remarks
JIS K-5600-5-4
150gf, 45 degree
1) Peeling upward by 90°
2) Peeling downward by 90°
Dot-Spacer
Within "guaranteed active area",
but not on the age and Dot-
Spacer.
Remarks
FFC connector
Reference: 250gf