System Setup; Figure 2.1 Power Connector And Power Lines; Figure 2.2 Pin Assignment On The Power Receptor - Advantech TPC-31 User Manual

2.1

System Setup

You can quickly get up and running by following the step-by-step instructions below.
1. Open the package. check the packing list at the beginning of this manual to
make sure every item is there.
2. Connect the power connector to the 18~32 V
can either be from some power adapter or an in-house power source.
Warning! The system may be damaged when the power is turned on if the power
source is not connected to the correct pins.
TPC-31/61 User Manual

Figure 2.1 Power Connector and Power Lines

Figure 2.2 Pin Assignment on the Power Receptor

power lines. The power lines
DC
8