Table of Contents
Advertisement
b)
Color Temp settings differ between XYZ format signals and signals of other than XYZ format. The setting to be used depends on the signal format displayed
on screen A. If signals of different format are input on four screens, the color temperature for the signals on screens other than screen A may not be adjusted
correctly.
c)
Effective for 720/24P, 25P or 30P input signal displayed in H Delay.
d)
Effective for 2048 × 1080 input signal displayed in Native Scan.
e)
Different Marker Preset settings are enabled for each of the four screens.
f)
Common to all screen modes.
g)
Functions when Gamma (transmission gamma) in Matrix/Gamma is set to 2.2 or 2.6 RGB.
h)
For operable input signals, see "Aperture Modification Frequency" (page 100).
i)
Can be set when the SDI signal is input from the BKM-244CC.
j)
Can be set when the SDI signal is input from the BKM-250TG.
k)
Functions when an interlace signal is input.
If 1080i interlace signal is input and the format is set to 1080PsF, film cadence processing is not done. Set the signal to 1080I. Even if the item is set to 2-3
or 2-3-3-2, it is automatically set to 2-2 for a 50i interlace input signal.
l)
Fixed to 16:9 for 720P input signals.
m)
Excludes 640 × 480/60P. Fixed to 16:9 with 1280 × 720/50P and 60P.
n)
Does not function when the HDMI computer signal is input.
o)
Functions when HDMI Auto (page 49) in Screen Aspect is set to Off.
p)
Fixed to Native Scan when the HDMI computer signal is input.
q)
Functions only when a YCbCr signal is input.
r)
Not adjustable with the internal signal.
s)
Does not function for 2048 × 1080 input signals.
t)
Does not function when the quantization range is set to Full.
90
Input Signals and Adjustable/Setting Items
Advertisement
Table of Contents
