Related Manuals for Sony trimaster EL PVM-2551MD
Summary of Contents for Sony trimaster EL PVM-2551MD
- Page 1 4-409-417-13(2) Professional Video Monitor Instructions for Use Before operating the unit, please read this manual thoroughly and retain it for future reference. PVM-2551MD © 2011 Sony Corporation...
- Page 2 When you dispose of the unit or accessories, you must For the customers in Europe obey the laws in the relative area or country and the The manufacturer of this product is Sony Corporation, regulations in the relative hospital. 1-7-1 Konan, Minato-ku, Tokyo, 108-0075 Japan.
- Page 3 guarantee matters please refer to the addresses given in If you have questions on the use of the above Power separate service or guarantee documents. Cord / Appliance Connector / Plug, please consult a qualified service personnel. Symbols on the unit WARNING on power connection for medical Symbol Location...
- Page 4 Warning The use of accessories and cables other than those specified, with the exception of replacement parts sold by Sony Corporation, may result in increased emissions or decreased immunity of the PVM-2551MD. Guidance and manufacturer’s declaration-electromagnetic emissions The PVM-2551MD is intended for use in the electromagnetic environment specified below.
- Page 5 Guidance and manufacturer’s declaration - electromagnetic immunity The PVM-2551MD is intended for use in the electromagnetic environment specified below. The customer or the user of the PVM- 2551MD should assure that it is used in such as environment. IEC 60601 test Immunity test Compliance level Electromagnetic environment - guidance...
- Page 6 Guidance and manufacturer’s declaration - electromagnetic immunity The PVM-2551MD is intended for use in the electromagnetic environment specified below. The customer or the user of the PVM- 2551MD should assure that it is used in such as environment. IEC 60601 test Immunity test Compliance level Electromagnetic environment - guidance...
- Page 7 Recommended separation distances between portable and mobile RF communications equipment and the PVM- 2551MD The PVM-2551MD is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the PVM-2551MD can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (Transmitters) and the PVM-2551MD as recommended below, according to the maximum output power of the communications equipment.
-
Page 8: Table Of Contents
Table of Contents Precaution .............. 9 On Safety ............9 On Installation ............ 9 Handling the Screen ........... 9 On Burn-in ............9 On a Long Period of Use ........9 On Cleaning ............. 10 Disposal of the Unit ......... 10 Recommendation to Use more than One Unit .............. -
Page 9: Precaution
• The screen and the cabinet become warm during Precaution operation. This is not a malfunction. On Burn-in On Safety Due to the characteristics of the material used in the • Operate the unit only with a power source as specified OLED panel for its high-precision images, permanent in the “Specifications”... -
Page 10: On Cleaning
If you have any questions about this unit, contact your On cleaning the monitor authorized Sony dealer. A material that withstands disinfection is used for the front protection plate of the medical use monitor. The protection plate surface is especially treated to reduce On Fan Error reflection of light. -
Page 11: Features
Optional port the conventional bottom emission structure of TFT, Two optional input adaptors can be installed. The Sony’s OLED panel can reproduce a crisper image due composite, Y/C, component, analog RGB, SDI or DVI- to high brightness. Furthermore, a unique microcavity... - Page 12 and SD-SDI, but also 3G-SDI, which transmits twice as Screen saver much data as HD-SDI with a Single-link. To reduce burn-in, the brightness of the screen can be automatically decreased when a still image is displayed Multi-format for more than 10 minutes. NTSC or PAL color system or DTV format, such as 720p, 1080i, etc.
-
Page 13: Location And Function Of Parts And Controls
Location and Function of Parts and Controls Front Panel COMPOSITE COMPONENT – – – HD15 – – USER MEM a Tally lamp h BRIGHT (brightness) buttons You can check the status of the monitor by the color of Adjusts the picture brightness. the tally lamp. - Page 14 j Input select buttons Press the button to monitor the signal input to each connector. A-1, A-2, B-1 and B-2 buttons are used when an optional input adaptor has been installed in the option port. COMPOSITE button: to monitor the signal through the COMPOSITE IN connector Y/C button: to monitor the signal through the Y/C IN connector...
-
Page 15: Input Signals And Adjustable/Setting Items
Input Signals and Adjustable/Setting Items Input signal Item Video* B & W* Component* RGB* Computer Y/C* DVI* HD15 CONTRAST BRIGHT* × CHROMA PHASE × (NTSC) APERTURE COLOR TEMP COLOR SPACE AUTO CHROMA/ × × × × × × × × PHASE ×... -
Page 16: Rear Panel
*9 For details on the input signal available for the multi *12 The signal can only operate with PRESET 6 (see page 40). display, see “For the multi display” (page 42). *13 When a BKM-256DD is installed, the number of the *10 The signal cannot operate with PRESET 7 and 8 (see input connector is increased. - Page 17 i Optional input port Connect to the RS-232C control connector on external An optional input adaptor can be installed according to equipment connected to the monitor. The monitor can your system configuration (see page 19). be operated according to control commands sent from The left side port is A and the right side port B.
-
Page 18: Connecting The Ac Power Cord
Insert the DC IN connector into the DC 5V/24V IN Connecting the AC connector on the bottom of this unit until it locks. Power Cord Connect the supplied AC power cord as illustrated. Two kinds of AC plug holders are supplied with this unit. -
Page 19: Installing The Input Adaptor
Installing the Input Removing the Adaptor Connector Cover Before installing the input adaptor, disconnect the power When the unit is shipped from the factory, a connector cord. cover is attached to the PARALLEL REMOTE connector and the SERIAL REMOTE connector (RJ- Remove the panel of the optional input port. -
Page 20: Selecting The Default Settings
Selecting the Default Settings When you turn on the unit for the first time after – purchasing it, select the area where you intend to use this – unit from among the options. – – The default setting values for each area –... -
Page 21: Selecting The Menu Language
2 If LATIN AMERICA is selected: Selecting the Menu PAL&PAL-N area Language L A T I N A M E R I C A P A L & P A L - N A R E A Argentina A R G E N T I N A P A R A G U A Y Paraguay U R U G U A Y... -
Page 22: Using The Menu
The setting items (icons) in the selected menu are Using the Menu displayed in yellow. USER CONFIG – SYSTEM SETTING 1/2 The unit is equipped with an on-screen menu for making M AT R I X : C O M P O N E N T L E V E L : xxxx various adjustments and settings such as picture control, N T S C S E T U P :... - Page 23 The menu icon presently selected is shown in About the memory of the settings yellow and setting items are displayed. The settings are automatically stored in the monitor memory. USER CONFIG – SYSTEM SETTING 1/2 M AT R I X : C O M P O N E N T L E V E L : xxxxx N T S C S E T U P :...
-
Page 24: Loading User Memory
Loading USER MEMORY Adjustment Using the Menus You can load the picture settings saved in the USER MEMORY menu (on page 35). Items The screen menu of this monitor consists of the COMPOSITE following items. COMPONENT – STATUS (the items indicate the –... -
Page 25: Adjusting And Changing The Settings
USER CONFIG For the video input SYSTEM SETTING MATRIX STATUS 1/2 COMPONENT LEVEL F O R M AT xxxxxxxxx NTSC SETUP xxxxxxxx C O L O R T E M P GAMMA G A M M A FORMAT DISPLAY C O M P O N E N T L E V E L xxxxx N T S C S E T U P xxxxxxxxx... -
Page 26: Color Temp/Space Menu
• Flicker free For the video input • Model name and serial number • OPTION A and serial number USER CONTROL 1/3 • OPTION B and serial number AU T O C H R O M A / P H A S E AU T O A D J VA L U E : S TA R T : COLOR TEMP/SPACE menu... - Page 27 For the DVI/HD15 input Submenu Setting SUB CONTROL Adjusts finely the adjustment range * The 1/3 menu cannot be adjusted. of the button on the front panel for BRIGHTNESS. • BRIGHTNESS: Adjusts the USER CONTROL 2/3 picture brightness. S U B C O N T R O L •...
-
Page 28: User Config Menu
USER CONFIG menu Submenu Setting The USER CONFIG menu is used for setting the PICTURE CONTROL Adjusts to monitor the picture more clearly. system, multi display, function button, computer detect • SIZE H: Adjusts the horizontal and option DVI. size of the picture. The higher the setting, the larger the horizontal size of the USER CONFIG... - Page 29 Submenu Setting Submenu Setting GAMMA Selects the appropriate gamma I/P MODE (picture delay Selects to set the delay by the mode from the five settings (“1.8,” minimum) picture processing to the minimum “2.0,” “2.2,” “2.4,” “2.6,” level when the interlace signal is “DICOM”...
- Page 30 For details, consult your scan mode. See “FUNCTION BUTTON Sony dealer. SETTING” (page 31) and “About the function assigned to the function button” FLICKER FREE Set this to ON to enable view (page 31).
- Page 31 Submenu Setting Submenu Setting SUB INPUT Sets the input signal of the sub display. F1 BUTTON to F4 Assigns the function to the function SELECT You can select from among BUTTON buttons of the front panel and turns the COMPOSITE, Y/C, RGB, function on or off.
-
Page 32: Scan Mode Image
DISPLAY LAYOUT APA (Auto Pixel Alignment) Press the button to set DISPLAY LAYOUT when the Press to adjust the picture automatically to maximum multi display is on. The mode switches in the sequence clarity for the signal input to the HD15 input connector. POP t PIP t SIDE BY SIDE with every press of the For finer according to the input signal, see “DOT button (see “DISPLAY LAYOUT”... -
Page 33: Remote Menu
OPTION DVI SETTING * This settings are displayed only when a BKM-256DD is installed. USER CONFIG – OPTION DVI SETTING OPTION DVI SETTING E X T 5 V ( DV I - I N ) : E X T 5 V ( DV I - O U T ) : E D I D U P D AT E : xxxxx E D I D S TAT U S :... -
Page 34: Key Inhibit Menu
Submenu Setting Submenu Setting MONITOR Set the monitor setting. PARALLEL REMOTE Selects the PARALLEL REMOTE MONITOR ID: Sets the ID connector pins for which you want of the monitor. to change the function. GROUP ID: Sets the group You can assign various functions to ID of the monitor. -
Page 35: User Memory Menu
USER MEMORY menu To save the picture setting Press the + or – button to select the memory number U S E R M E M O RY 1 / 3 in the USER MEMORY menu, then press the 0 1 U S E R 0 1 ENTER button. -
Page 36: Troubleshooting
The menu for setting the user name appears. Troubleshooting U S E R M E M O RY 1 / 3 S E R 0 1 This section may help you isolate the cause of a problem + – C H A N G E C H A R . E N T E R C U R S O R and as a result, eliminate the need to contact technical... -
Page 37: Specifications
RGB: 0.7 Vp-p ± 3 dB (Sync On Green, 0.3 Vp-p sync negative) (Supplied from AC adaptor) Component: 0.7 Vp-p ± 3 dB (75% AC Adaptor (Sony, AC-110MD) AC IN: 100 V-240 V, 50/60 Hz, 1.53 A- chrominance standard color bar 0.58 A signal) DC OUT: 24 V 5.0 A 5 V 0.060 A... - Page 38 Storage and transport humidity Always verify that the unit is operating properly before 0% to 90% (no condensation allowed) use. SONY WILL NOT BE LIABLE FOR Storage and transport pressure DAMAGES OF ANY KIND INCLUDING, BUT 700 hPa to 1060 hPa...
-
Page 39: Available Signal Formats
Pin number Signal Available signal formats The unit is applicable to the following signal formats. For details on the input signal available for HD15, DVI and BKM-256DD, see page 40. Composite BKM- BKM- BKM- System Component 220D 243HS 250TG BKM-227W BKM-229X 575/50I (PAL) - Page 40 Available HD15/DVI/BKM-256DD input signal format About the preset signal This unit has a preset memory for signals connected to the HD15 and DVI input connectors, and BKM-256DD. When a preset signal is input, the unit automatically detects the signal type and recalls the data for the signal from the preset memory to adjust it to an optimum picture.
- Page 41 Sync. polarity Dot clock Resolution [MHz] [kHz] [Hz] Horizontal Vertical 1920 × 1080 60 Hz 138.625 66.647 59.988 Positive Negative 1280 × 1024 60 Hz 91.000 63.194 59.957 Positive Negative 1280 × 768 50 Hz 65.125 39.518 49.959 Negative Positive 1280 ×...
- Page 42 PRESET 5 PRESET 7 (Selected using DVI in the menu) Preset signal [kHz] [Hz] Preset signal [kHz] [Hz] 640 × 480 31.5 1422 × 1064 33.75 HD15 800 × 600 31.3 712 × 480 15.734 1280 × 1024 66.44 704 × 572 15.625 DVI/ 800 ×...
- Page 43 Sync. polarity Dot clock Resolution [MHz] [kHz] [Hz] Horizontal Vertical 1920 × 1080 60 Hz 138.625 66.647 59.988 Positive Negative 1280 × 1024 60 Hz 91.000 63.194 59.957 Positive Negative 1280 × 768 60 Hz 80.125 47.693 59.992 Negative Positive 1280 ×...
- Page 44 Preset signal Signal standards 576/50P ITU-R BT.1358 480/60P SMPTE-293M 1080/50I SMPTE-274M SMPTE-260M/BTA DVI/ 1035/60I S-001B BKM-256DD SMPTE-274M/BTA 1080/60I S-001B 720/60P SMPTE-296M 720/50P SMPTE-296M PRESET 7 (Selected using DVI in the menu) Preset signal [kHz] [Hz] 1422 × 1064 33.75 712 × 480 15.734 704 ×...
-
Page 45: Dimensions
Side Dimensions When an optional stand SU-560 is attached Front 102.1 59.9 (2 When an optional stand SU-560 is attached 618.4 (24 195 (7 302 (12) Mass Approx. 8.1 kg (17 lb 14 oz) (when the 273.5 (10 optional stand and the input adaptor are not installed) Approx. - Page 46 Sony Corporation...