Download  Print this page

Right Side Panel - Sony SRM-L560 Operating Instructions Manual

Lcd video monitor.
Hide thumbs


not be connected to SRM Manager and the correct picture
may not be displayed.
e OPTION C connector (D-sub 9-pin)
Used for future expansion.
The cover is attached at the factory.
f Input option slots
Used to install the optional input adaptors.
For installing the input adaptor, see page 18.
For the input signals, see "Input/Output Connector and
Adaptor" on page 9.
g DVI-D (DVI digital) input connector
Inputs DVI Rev.1.0 applicable Single-link digital RGB

Right Side Panel

a MAIN POWER switch
When turned on (?), the monitor enters operation mode.
b AC IN connector (3-pin)
Connects the monitor to an AC power source, via the
supplied AC power cord.
To input the DVI signal of SXGA or higher resolution, use
the cable within 3 m (118
h HDMI input connector
Inputs the HDMI signal.
HDMI (High-Definition Multimedia Interface) is an
interface that supports both video and audio on a single
digital connection, allowing you to display high quality
digital picture. The HDMI specification supports HDCP
(High-bandwidth Digital Content Protection), a copy
protection technology that incorporates coding technology
for digital video signals.
• The monitor does not support the HDMI audio signal.
• Use HDMI compliant cable (not supplied), Category 2
(High Speed HDMI cable), with HDMI logo.
1 MAIN POWER switch
2 AC IN connector
inches) in length.
Location and Function of Parts


Table of Contents

   Also See for Sony SRM-L560

   Related Manuals for Sony SRM-L560

Comments to this Manuals

Symbols: 0
Latest comments: