Download  Print this page

Advertisement

Type: Sets the type of closed caption signal.
[708]: Select to display the closed caption signal of the
EIA/CEA-708 standards.
608(708): Select to display the closed caption signal of
the EIA/CEA-608 standards transmitted by EIA/CEA-
708 standards.
608(ANC): Select to display the closed caption signal
of the EIA/CEA-608 standards transmitted as the
ancillary data.
Service 708: Sets Service when Type is set to 708.
You can select from [Service1] to Service6.
Service 608: Sets Service when Type is set to 608(ANC)
or 608(708).
You can select from [CC1] to CC4 or Text1 to Text4.
OSD Level: Sets the luminance of letters.
You can select from [100IRE] (bright), 50IRE or 30IRE
(dark).
b Audio Level Meter
Sets whether or not to display the audio level meter (On or
[Off]).
When the BKM-250TG is installed, you can select the
item.
The setting is effective for the input signal of the BKM-
250TG.
Note
As the audio level meter is superimposed on the video
signal, a portion of the displayed meter may be cut
depending on the scan mode setting on the monitor.
Audio CH: Sets the audio channel.
You can select from [CH1-CH8] or CH9-CH16.
Position: Sets the display position of the audio level meter.
You can select from [Bottom] (bottom) or Top (top).
Note
The display position is fixed when 4K/QFHD mode is
selected.
Transparency: Sets the transparency of the background.
You can select from [Black] (black) or Half
Peak Hold: Sets the peak hold mode.
[Off]: The peak hold is not performed.
Auto: The peak hold continues about 1 second and is
released automatically.
Manual Reset: The peak hold is released manually.
To release, click the Peak Hold Reset button.
c Time Code
Sets whether or not to display the time code (On or [Off]).
When the BKM-250TG is installed, you can select this
item.
The setting is effective for the input signal of the BKM-
250TG.
68
System Configuration Window
Note
As the time code is superimposed on the video signal, a
portion of the displayed time code may be cut depending
on the scan mode setting on the monitor.
VITC/LTC: Sets the type of time code.
You can select from [VITC] or LTC.
Position: Sets the display position of the time code.
You can select from Top Left (top left), [Top Center]
(top center), Top Right (top right), Bottom Left
(bottom left), Bottom Center (bottom center) or
Bottom Right (bottom right).
Note
The display position is fixed when 4K/QFHD mode is
selected.
d Peak Hold Reset
Releases the peak hold on the audio level meter.
Note
Peak Hold Reset cannot be selected when Peak Hold is set
to Off or Auto.
(translucent).

Advertisement

Table of Contents

   Also See for Sony SRM-L560

   Related Manuals for Sony SRM-L560

Comments to this Manuals

Symbols: 0
Latest comments: