Table of Contents
Advertisement
Location and Function of Parts
Front Panel
a OPERATE lamp
Lights in red when the monitor is in standby mode. The
monitor will be in standby mode under the following
condition:
• The monitor is changed from operation mode to standby
mode by clicking the 1 STANDBY button in the
window of SRM Manager.
Lights in green when the monitor is put into operation
mode from standby mode by clicking the 1 STANDBY
button again.
Notes
• When the lamp is flashing in red, the monitor cannot be
put into operation mode. (Internal data initialization is
taking place.) Wait until the lamp is steadily lit.
• The lamp may show the error, warning or operation
mode.
For details, see "Error/warning/operation mode display
by the lamp" on page 10.
b STATUS lamp
The lamp may show the error, warning or operation mode.
For details, see "Error/warning/operation mode display
by the lamp" on page 10.
10
Location and Function of Parts
1 OPERATE lamp
2 STATUS lamp
3 OVER RANGE lamp
c OVER RANGE lamp
Lights in orange when the picture is displayed in black
detail mode or when the dynamic range of the following
item is exceeded.
• Contrast (Contrast)
Flashes when the luminance is decreased to protect the
monitor from a rise in temperature.
Note
The lamp may show the error, warning or operation mode.
For details, see "Error/warning/operation mode display
by the lamp" on page 10.
Error/warning/operation mode display by
the lamp
The OVER RANGE lamp, STATUS lamp or OPERATE
lamp on the front panel may show an error, warning or
operation mode while the monitor is being operated.
Error display
If the error is shown, please contact your Sony dealer.
Advertisement
Table of Contents
