Table of Contents
Advertisement
Zebra pattern display of the clipped portion
To end the black detail mode
Set Black Detail to off in Function of the Controls tab
window of the Main Operation window (page 51).
82
Displaying the Area Marker or Aspect Marker
Zebra pattern
Displaying the Area
Marker or Aspect Marker
The monitor is equipped with two area markers and center
marker as the safe area marker and aspect marker for
confirming the aspect ratio of the picture.
When Quad View mode is selected, you can use this
function.
1
Input the signal.
2
Select the screen with the screen mode button (page
42).
3
Set the marker preset data (Marker 1 to Marker 5) to
display in Marker Preset (page 47) of the
Configurations tab window of the Main Operation
window.
4
Set the marker to be displayed for the preset data set in
step 3 using the Edit button (page 47) in Marker Preset
of the Configurations tab window of the Main
Operation window.
To display all the markers simultaneously
If you set Marker (page 51) to on in the Controls tab
window of the Main Operation window, all the markers set
to on in steps 3 and 4 are displayed.
To display the aspect marker, area marker 1 or
area marker 2 individually
Set the marker button (Aspect Marker (page 51), Area
Marker 1 (page 51) or Area Marker 2 (page 51)) of the
marker you wish to display to on in the Controls tab
window of the Main Operation window.
To cancel the marker display
Set Marker, Aspect Marker, Area Marker 1 or Area
Marker 2 to off in the Controls tab window of the Main
Operation window.
Advertisement
Table of Contents
