Left Side Panel
a OPTION A connector
Used to connect a probe for automatic adjustment.
b OPTION B connector
Used for future expansion.
The cover is attached at the factory.
c LAN (10/100) connector (10BASE-T/100BASE-
Connect to the network or the LAN (10/100) connector of
the PC by using a 10BASE-T/100BASE-TX LAN cable
Location and Function of Parts
1 OPTION A connector
2 OPTION B connector
3 LAN (10/100) connector
4 NETWORK switch
Input block A
5 OPTION C connector
Input block B
6 Input option slots
7 DVI-D input connector
Input block C
8 HDMI input connector
Input block D
• For safety, do not connect the connector for peripheral
device wiring that might have excessive voltage to this
port. Follow the instructions for this port.
• The effective communication throughput may be
affected by the network system.
d NETWORK switch
LAN: To connect to the network.
PEER TO PEER: To connect to the LAN (10/100)
connector of the PC in one-to-one connection.
Set the NETWORK switches on input blocks A to D of the
monitor to the same setting. Otherwise, the monitor may