Maytag MAH-24 Use And Care Manual page 6

Using the Controls
Controls a t a glance
STEP 3
Dry er Exhaust tips
Select Wash/Rinse Temperature
Press the Temperature pad to select the wash and
rinse temperatures. The light next to the temperature
will illuminate. Press the pad repeatedly to scroll
through the temperature settings.
Hot/Cold - Whites and heavily soiled
color-fast items.
ATC Warm/Warm - Color-fast items.
When warm rinse is selected, only the
final rinse will be warm. The other rinses
will be cold to conserve energy.
ATC Warm/Cold – Moderately soiled,
color-fast items; most wrinkle free items
ATC Cold/Cold – Brightly colored, lightly soiled items
Cold/Cold – Brightly colored, very lightly soiled
items; washable woolens
IMPORTANT
• The washer features an automatic temperature
control (ATC) to provide a warm wash of
approximately 105˚ F, a warm rinse of approximately
80˚ F and cold wash of approximately 65˚ F on the
ATC temperature selections.
REMEMBER: In wash water temperatures below
60 ˚ F, detergents do not dissolve well or clean well.
5
Not es
STEP 4
Select Spin Speed
Press the Spin pad to select the appropriate spin
speed for the load. The light next to the spin speed will
illuminate. Press the pad repeatedly to scroll through
the spin speed settings.
High – Use for underwear, t-shirts and
sturdy cottons.
Medium – Use for jeans, wrinkle free or
"wash-and-wear" items and synthetics.
Low – Use for delicate items needing a slow
spin speed because of fabric and
construction and for hang-dry items.
No Spin – Drains the washer without spinning. Use
for extremely delicate items that cannot tolerate any
spin.
STEP 5
Select Soil Level
Press the Soil Level pad to select the appropriate soil
level for the load. The light next to the Soil Level pad
will illuminate. Press the pad repeatedly to scroll
through the soil level settings.
Heavy – Use for cleaning heavily soiled
loads.
Normal – Use for cleaning moderately soiled
loads. This setting will be appropriate for
most loads.
Light – Use for cleaning lightly soiled loads.