When Installing A Booster Seat; When Installing A Child Restraint System - Lexus 2016 IS 200t Service Manual

66
1-1. For safe use
CAUTION

When installing a booster seat

■
To prevent the belt from going into ALR lock mode, do not fully extend the shoulder
belt. ALR mode causes the belt to tighten only. This could cause injury or discomfort to
the child. (P. 32)

When installing a child restraint system

■
Follow the directions given in the child restraint system installation manual and fix the
child restraint system securely in place.
If the child restraint system is not correctly fixed in place, the child or other passengers
may be seriously injured or even killed in the event of a sudden braking or an accident.
If the driver' s seat interferes with the child
●
restraint system and prevents it from being
attached correctly, attach the child restraint
system to the right-hand rear seat.
Adjust the front passenger seat so that it does
●
not interfere with the child restraint system.
Only put a forward-facing child restraint sys-
●
tem on the front seat when unavoidable.
When installing a forward-facing child
restraint system on the front passenger seat,
move the seat as far back as possible even if
the "AIR BAG OFF" indicator light is illumi-
nated. Failure to do so may result in death or
serious injury if the airbags deploy (inflate).
IS350/300/200t_U (OM53D18U)