When Using The Intuitive Parking Assist; When Using Intuitive Parking Assist; Notes When Washing The Vehicle - Lexus 2016 IS 200t Service Manual

If a message is displayed on the multi-information display
■
P. 484
Certification
■
For vehicles sold in the U.S.A.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions; (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
For vehicles sold in Canada

This ISM device complies with Canadian ICES-001.
Cet appareil ISM est conforme a la norme NMB-001 du Canada.
CAUTION

When using the intuitive parking assist

■
Observe the following precautions.
Failing to do so may result in the vehicle being unable to be driven safely and possibly
cause an accident.
Do not use the sensor at speeds in excess of 6 mph (10 km/h).
●
The sensors' detection areas and reaction times are limited. When moving forward or
●
reversing, check the areas surrounding the vehicle (especially the sides of the vehi-
cle) for safety, and drive slowly, using the brake to control the vehicle' s speed.
Do not install accessories within the sensors' detection areas.
●
NOTICE

When using intuitive parking assist

■
In the following situations, the system may not function correctly due to a sensor mal-
function etc. Have the vehicle checked by your Lexus dealer.
The intuitive parking assist operation display flashes, and a beep sounds when no
●
obstacles are detected.
If the area around a sensor collides with something, or is subjected to strong impact.
●
If the bumper or grille collides with something.
●
If the display shows continuously without beeping, except when the buzzer mute
●
switch has been turned on.
If a display error occurs, first check the sensor.
●
If the error occurs even when there is no ice, snow or mud on the sensor, it is likely that
the sensor is malfunctioning.

Notes when washing the vehicle

■
Do not apply intensive bursts of water or steam to the sensor area.
Doing so may result in the sensor malfunctioning.
IS350/300/200t_U (OM53D18U)
4-5. Using the driving support systems
229
4