Replacing The Following Bulbs; Discharge Headlights (If Equipped); Led Lights; Condensation Build-Up On The Inside Of The Lens - Lexus 2016 IS 200t Service Manual

Replacing the following bulbs

■
If any of the lights listed below has burnt out, have it replaced by your Lexus
dealer.
Headlights
●
Parking lights and daytime running lights
●
Side marker lights
●
Side turn signal lights
●
Fog lights (if equipped)
●
Outer foot lights
●
Stop/tail lights
●
Tail lights
●
High mounted stoplight
●
License plate lights
●

Discharge headlights (if equipped)

■
If voltage to the discharge bulbs is insufficient, the bulbs may not come on, or may go out
temporarily. The discharge bulbs will come on when normal power is restored.

LED Lights

■
The lights other than the discharge headlights (if equipped), front turn signal lights, rear
turn signal lights, back-up light and outer foot lights each consist of a number of LEDs. If
any of the LEDs burn out, take your vehicle to your Lexus dealer to have the light
replaced.

Condensation build-up on the inside of the lens

■
Temporary condensation build-up on the inside of the headlight lens does not indicate a
malfunction. Contact your Lexus dealer for more information in the following situations:
Large drops of water have built up on the inside of the lens.
●
Water has built up inside the headlight.
●
When replacing the front turn signal lights (vehicles with LED headlights)
■
When the washer fluid filler opening is removed with a large amount of washer fluid con-
tained in the washer tank, washer fluid may spill onto the vehicle and cleaning may be
required.
When replacing light bulbs
■
P. 454
IS350/300/200t_U (OM53D18U)
7-3. Do-it-yourself maintenance
463
7