Changing The Vehicle-To-Vehicle Distance (Vehicle-To-Vehicle Distance Control Mode); Vehicle-To-Vehicle Distance Settings (Vehicle-To-Vehicle Distance Control Mode); Canceling And Resuming The Speed Control - Lexus 2016 IS 200t Service Manual

206
4-5. Using the driving support systems
Changing the vehicle-to-vehicle distance (vehicle-to-vehicle distance
control mode)
Pressing the button changes the vehi-
cle-to-vehicle distance as follows:
Long
1
Medium
2
Short
3
The vehicle-to-vehicle distance is set
automatically to long mode when the
engine switch is turned to IGNITION
ON mode.
If a vehicle is running ahead of you, the preceding vehicle mark will also be displayed.
Vehicle-to-vehicle distance settings (vehicle-to-vehicle distance con-
trol mode)
Select a distance from the table below. Note that the distances shown corre-
spond to a vehicle speed of 50 mph (80 km/h). Vehicle-to-vehicle distance
increases/decreases in accordance with vehicle speed.
Distance options
Medium

Canceling and resuming the speed control

Pulling the lever toward you cancels
1
the speed control.
The speed setting is also canceled when
the brake pedal is depressed.
Pushing the lever up resumes the
2
speed control and returns vehicle
speed to the set speed.
Resuming is available when the vehicle
speed is more than approximately 25
mph (40 km/h).
IS350/300/200t_U (OM53D18U)
Long
Short
Preceding
vehicle mark
Vehicle-to-vehicle distance
Approximately 160 ft. (50 m)
Approximately 130 ft. (40 m)
Approximately 100 ft. (30 m)