130
3-3. Adjusting the seats
Cancelation procedure
■
Carry only the key you want to cancel and then close the driver' s door. If 2 or
more keys are in the vehicle, the driving position cannot be canceled properly.
Turn the engine switch to IGNITION ON mode.
1
While pressing the "SET" button, press and hold the door lock switch
2
(either lock or unlock) until the buzzer sounds twice.
If the button could not be canceled, the buzzer sounds continuously for approxi-
mately 3 seconds.
Recalling the driving position using the memory recall function
■
Different driving positions can be registered for each electronic key. Therefore, the
●
driving position that is recalled may be different depending on the key being carried.
If a door other than the driver' s door is unlocked with the smart access system with
●
push-button start system, the driving position cannot be recalled. In this case, press the
driving position button which has been set.
Customization
■
The unlock door settings of the memory recall function can be customized.
(Customizable features: P. 552)
CAUTION
Seat adjustment caution
■
Take care during seat adjustment so that the seat does not strike the rear passenger or
squeeze your body against the steering wheel.
IS350/300/200t_U (OM53D18U)